Tap Replacement in Petrie
Swapping an old tap for a new one looks simple, and it still needs a licence in Queensland. Petrie Plumbing Services handles tap replacement in Petrie end to end: we check the old fitting, match the new tap to the bench or basin, then fit and test it. Every job is done by a licensed plumber, and you see a fixed quote before any work starts.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Petrie homeowners book this work alongside our wider tap and toilet plumbing service. Garden and hose taps sit elsewhere, on our outdoor tap repairs page.
Matching a New Tap to Your Sink or Basin
A mixer sends hot and cold through one spout, worked by a single lever or by two handles; separate taps keep one spout per supply. Both styles can look right and still not fit, which is why the old fitting gets checked before anything is ordered.
A replacement has to suit three things before it can go in:
- how many holes sit in the bench or basin, and how wide each one is
- whether the tap mounts on the deck or on the wall
- the supply lines and connectors waiting beneath
A wall-mounted unit draws water from pipework inside the wall, so switching between wall and deck mounting changes the wall as well as the tap. An isolation valve on each supply line lets the plumber stop flow to the tap alone, keeping the rest of the house running.
When the fault is a worn washer rather than the whole fitting, our tap repairs team handles that instead.
Do You Need a Licensed Plumber to Fit a Tap
Yes, replacing a tap needs a licensed plumber in Queensland. The QBCC's unregulated list includes one tap task only: changing a tap's washer or its jumper valve, which anyone with the skill may do, though the finished job must still comply.
The paperwork then splits by job:
A straight swap
an old-for-new tap in the same spot is minor work, so a licensed plumber carries it out with no council permit and no Form 4.
A tap in a fresh position
this is notifiable work, and the plumber files a Form 4 with the QBCC within 10 business days of completion.
Rentals add one layer. A tenant needs the owner or manager's signed consent on Form 23 before attaching any fixture, and a reasonable request cannot be refused outright.
A tenant who fits a tap without that consent leaves the owner or manager with three choices. The owner or manager can call it a breach and work through the dispute, accept the change as an improvement, or remove the fitting and pass on what that cost.
WaterMark and WELS on a New Tap
WaterMark certification shows a tap complies with Australia's Plumbing Code, and the Water Efficiency Labelling and Standards scheme (WELS) records how many stars it earns and how much water it uses. Without both, the tap cannot be legally installed.
Business Queensland sets a 3-star minimum for tap fittings and showerheads, and states the rule does not apply to renovations. Buying online adds one more check. A listing has to display the WaterMark trademark with the product spec and licence number, plus the WELS registration details: the number or model name, the stars and the usage figures.
Both product databases can be searched by model name before you commit. You can also ask a seller to fill any gaps in the listing.
Tap Type, Access and Paperwork Behind the Quote
The price of a tap replacement turns on a short list of drivers. The tap type matters first, then whether the existing isolation valves and connectors still have life in them, whether the bench or basin holes fit the new unit, and how easy the access is beneath. A new or moved tap adds the Form 4 fee: the contractor lodges and pays it, and may pass that cost, admin included, on to the owner.
No dollar figure gets quoted over the phone. The fixed quote settles the figure before work begins.
Tap Flow Limits for Rental Properties
Under the Residential Tenancies Authority's water charging rules, internal cold water taps and single mixer taps cannot exceed 9 litres per minute if an owner wants to pass the full water account to a tenant. The limit applies to cold taps over a laundry tub, a kitchen sink or a hand basin, mixers included.
Taps on the bath, garden taps outside and taps feeding a washing machine or dishwasher are exempt. For fixtures made from 2005 onwards, look for a rating of 3 stars or better.
The Residential Tenancies Authority recommends keeping plumbing reports, compliance certificates, receipts, packaging and instruction manuals as proof of efficiency.
Owners Upgrading an Ageing Housing Stock
Most houses here went up between the 1960s and the 2000s, so plenty of the original tapware around the older grid near Gympie Road has now seen decades of daily use. At the last census, 43.4 per cent of the suburb's households were paying off a mortgage and another 25.2 per cent owned outright, and both groups tend to upgrade rather than move.
Landlords weighing the flow limit above often swap tired mixers at the same time, so the property meets the charging test in one visit.
How Your Tap Replacement Visit Runs
- 1
Get in touch
Call (07) 3523 6484 or send a quick message about the job in Petrie, and we'll ask what we need to know.
- 2
We check and fit
We shut off the isolation valves, remove the old fitting, confirm the holes and supply lines suit the new tap, then fit it and test for leaks at every joint.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Petrie?
$0 call-out fees, available 24/7, and same-day where we can.
Questions About New Tapware
Call (07) 3523 6484What do WaterMark and WELS mean on a tap?
WaterMark is the certification proving a tap meets the Plumbing Code of Australia, and WELS is the register that grades its water use in stars. A licensed plumber cannot legally fit a tap carrying neither, so look for both marks before buying.
Can I buy my own tap and have a plumber fit it?
Yes, as long as the tap you choose displays the WaterMark trademark and a WELS star rating. Certification is what makes the fitting legal to install, so confirm both marks on the product before purchasing.
How much does it cost to replace a tap in Petrie?
The tap type and the condition of the existing isolation valves and connectors drive the price most. Your fixed quote, given before any work starts, confirms the final figure.
What is the tap flow limit for rentals?
Under the Residential Tenancies Authority's water charging rules, the ceiling is 9 litres per minute for internal cold taps and single mixers before an owner can pass the full water account to a tenant. The limit covers taps over a hand basin, kitchen sink or laundry trough, not bath, garden or appliance taps.
What should a replacement tap match on my Petrie sink?
The new tap has to suit the number and size of the holes, the deck or wall mounting, and the supply connections underneath. The plumber checks the old fitting before a new one is chosen.
Call Us About Fitting the New TapWe'll call you back.
Ring (07) 3523 6484 and tell us what's wrong. You get $0 call-out fees, a fixed quote before any work starts and same-day where we can, 7 days a week.
To claim your $0 call-out fee, call (07) 3523 6484 today.